When the WUUK Wireless Cam Pro is disconnected, there are some reasons this could happen, and the troubleshooting you can try accordingly step by step：
（1）The connection status refresh failed. Kindly try to pull down the Dashboard page to refresh the status. Or to completely kill the WUUK app and enter again.
（2）The wireless cam is not powered up or is running out of battery. You can go to the Camera settings> Power management to check the last remaining battery recorded. Try to fully charge the camera and long press its power button to check if the camera can be powered up. (When the camera is charging, its indicator light will flash in stable green or stable blue.)
（3）The connection between the camera and WUUK Base Station is lost. At this point, the camera's light may flash in stable red. Please short press the power button 5 times, then long press the button to give the camera a whole reboot.
（4）The distance between the camera and WUUK Base Station is too far away. Try to move the cam and base station and make the Network diagnostic<Camera Setting until finding a good spot where the signal is relatively strong enough.
Please contact WUUK support at hello@wuuklabs.com, if this does not fix your issues. Also, please provide the SN info of the device that you encounter the issue with( Go to Camera settings> About device).
Comments
0 comments
Article is closed for comments.