Thanks for purchasing WUUK Smart Doorbell Pro. Please follow the steps below to connect WUUK Smart Doorbell Pro to WUUK Base Station.
Note: Running this wireless doorbell system requires a WUUK Base Station. (For more details about WUUK Base Station, kindly refer to WUUK Base Station Supported Devices – Wuuk Labs Corp.
If you've already set up the Base Station supported system and want to add one more WUUK Smart Doorbell Pro Add-on, you can pass through the first 2 steps and skip to the bottom to start the pairing process with Doorbell Pro Add-on.
Step 1. Get the WUUK app
( If you've already gotten the WUUK app, skip this step）
Download the WUUK app from the App Store (IOS devices) or Google Play (Android devices)
Sign up for a WUUK account, then follow the onscreen instructions to complete the setup.
Step 2. Setting up WUUK Base Station
( If you have already paired WUUK Base Station, skip this step and turn to Step 3)
Note: You have to go to the Phone setting and select the WUUK app to enable Local Network permission.
1. Go to your WUUK app and click "+" on the upper right corner of the Dashboard, select WUUK Base Station
2. Make the Base Station connected to power and your router, and wait for the light on it to turn green.
-
Put the Base Station into pairing mode, press and hold the button for more than 3 seconds, until the light flashes red.
-
Connect your phone to WiFi, make sure your phone is connected to the same WiFi from the router your Base Station is connected to, then the Base Station will prompt "Pairing Successful" and you can see" Your Base Station is now connected!" on your WUUK app.
-
Continue and name your Base Station in your favor and name the device name.
-
The Base Station has been set up successfully, and you will see a suggestion page to better your signal strength. At this point, you can click continue to add devices to this Base Station or you can quit it by clicking "Cancel". At this step, you can continue the pairing process and pair WUUK Smart Doorbell Pro directly if needed.
Connect the WUUK Smart Doorbell Pro Add-on with WUUK Base Station
( If you don't choose to add a device right after you set up WUUK Base Station or want to add one more add-on to your existing system, you could follow the instructions below to complete the pairing.)
1. Go to your WUUK app and click "+" in the upper right corner of the Dashboard, select WUUK Smart Doorbell Pro
2. Choose the Base Station you want the doorbell to connect with.
-
Keep the Base Station and the doorbell within 2 meters. Then press the On&Off button on the doorbell for 3 seconds to turn on the device, and you will hear the sound "Hello, Wuuk" from the doorbell. If the doorbell is already on, please tick the option directly and continue to the next step.
4. Long press the button on the doorbell for 3 seconds until the light starts flashing red. The doorbell is in paring mode.
5. The doorbell will prompt "Pairing Successful" and you can see" The doorbell is now connected!" on your WUUK app.
6. Click Continue and name your doorbell in your favor. You can repeat the above steps to add other doorbells.
Comments
1 comment
YES RF
Please sign in to leave a comment.