Initial Setup for WUUK Wired Smart Doorbell Pro

Step 1. Get the WUUK app

( If you've already gotten the WUUK app, skip this step）

Step 2. Enable Bluetooth permission in the mobile phone settings, and switch Bluetooth to on

Step 3. Setting up WUUK Wired Smart Doorbell Pro

( Power up the doorbell (hardwired)

1. Go to your WUUK app and click "+" on the upper right corner of the Dashboard, and select wired smart doorbell pro.

2. Connect the power supply and wait for the doorbell indicator light to flash red
3. Enter 2.4Gwifi and password, and wait for the pairing to complete

Step 4. Setting up WUUK doorbell chime to the doorbell

1. Open the Wuuk app. Go through the "Add a device" process (the + icon on the top right corner) and find Wuuk doorbell chime Option. Select the doorbell to be paired.
2. Assemble your chime and plug the chime into any standard power outlet.
3. Press and hold the chime’s Sync button on its top for 3 seconds. You will see its light flash red and hear a “beep” sound, indicating it is ready to pair with the doorbell.
4. Tap the Connect button in the app.
5. Wait for the chime’s light to turn to solid blue and plays the sound "Pairing successful", which means they have connected and are able to function together. Try to tap on the doorbell and check whether the chime will ring or not.
6. Tap Done to finish the setup process.

Reset the doorbell

1. Press and hold the sync button of the doorbell for 3 seconds until you hear the voice "Beep",
2. Enter 2.4Gwifi and password, and wait for the pairing to complete
3. Wait for the red light flashes on the doorbell
4. The doorbell will play the voice "Beep, pairing successful"