1.How many hours is the battery life of the WUUK baby monitor?
WUUK baby monitor lasts around 8 hours on a full charge.
WUUK baby camera is outlet powered, the baby monitor can be battery operated.
2. What is the wireless range of the WUUK baby monitor?
The range is approximately 1,000 feet (300 meters) in an open field for a baby monitor.
3. Does it require Wi-Fi to work properly?
Wi-Fi is not necessary if you only view the camera through the monitor. However, if you want to monitor the video through the WUUK app, both the Baby Camera and the WUUK app need to be connected to the Internet. If the camera is disconnected from Wi-Fi, the alarm message will not be sent to the app. When the camera is successfully connected to Wi-Fi, the app can receive notifications anywhere and anytime through cellular data or Wi-Fi.
4. How to fix audio problems?
Making sure that there is sound within the covering range of the camera microphone.
Moving the camera or monitor further apart if the unit emits a loud, high-pitch noise (feedback).
5. What should I do if the picture is disconnected?
Move the camera closer to the monitor. Reposition the camera, monitor or both to improve reception.
Remove obstructions between the monitor and camera. Materials such as brick, concrete and wood can greatly impact the wireless signal strength.
Adjust the camera antennas to vertical position.
6. What should I do if the picture is not clear?
Check the camera lens for dirt, dust, spiderwebs. Clean the lens with a soft, clean cloth.
Too much environmental interference will affect picture clarity. Please try moving your camera to a different location.
7. What should I do if the picture is flickering?
Move the camera closer to the monitor.
Remove obstructions between the monitor and camera.
Adjust the antennas to vertical position.
8. What should I do if the monitor picture is frozen?
Repower the baby camera (plug out the adapter, then plug it into the socket again)
Press the RESET key at the side of the baby monitor and check the connection to the camera. If the monitor displays a “Waiting for connection” message, move the monitor closer to the camera.
Comments
0 comments
Please sign in to leave a comment.