How do I schedule the lighting using the WUUK Lamp Socket?

The WUUK Lamp Socket is designed to seamlessly integrate with the WUUK Cam V2, allowing for remote turning-off and automatic lighting-on based on motion-detection triggers or preset time settings.

After connecting the Cam V2 to the Lamp Socket and attaching it to your lamp base, you can establish rules for the lamp lighting by adjusting the Cam V2's settings to suit your preferences.

1. Remote Light Turning Off

Easily turn off the light by activating the Light Off button.

Once toggled on, the original switch cannot turn the light back on. To revert to using the physical switch, you must disable the Light Off feature.

2. Time-based Rules

Enable Time-based rules to effortlessly schedule the start and end times for the light to turn on during specific intervals.

It's worth noting that the start time can be set to occur after the end time.

For example, if you want the light to be on from 00:00 to 6:00 and 17:00 to 24:00, set the start time to 17:00 and the end time to 6:00 the next day.

3. Motion/Human-detection Based Rules

Activate Motion/Human-based rules to customize settings for light activation upon detecting motion or human presence.

Choose whether the light turns on for motion or humans and specify the duration once the corresponding trigger is detected.

Importantly, these rules are effective only during nighttime.

For more questions, contact WUUK Support!